palier pour vaderstad

BEARING FOR VÄDERSTAD CARRIER, CULTUS, SPIRIT, AND TOPDOWN – PART NO. CAM199366

Replacement bearing for Väderstad agricultural equipment

The CAM199366 bearing is a replacement part designed for various types of agricultural equipment Väderstad, particularly the following product lines Carrier, Carrier Drill, Cultus, Seed Hawk, Spirit, and TopDown. It is designed to support and guide a rotating mechanical component under demanding agricultural operating conditions.

With a 117 mm outer diameter, a total height of 62 mm and a mount for 4 points spaced 98 mm apart, this bearing is intended to replace a worn or damaged unit with the same specifications.

Part number CAM199366 can be used, in particular, in conjunction with the comparison part numbers 2085062, 152271, 470974, 481460, and 440488, subject to verification of the machine's assembly and serial number.

Technical Specifications for the CAM199366 Bearing

Main Dimensions

The bearing has the following characteristics:

• Reference: CAM199366
• Outer diameter: 117 mm
• Diameter / Thread Specified: Ø 20 / 45 mm
• Height h1: 10 mm
• Overall height H: 62 mm
• Mounting: 4 points
• Center-to-center diameter: 98 mm
• Wheel connector: M12 x 1.25
• Application: Väderstad agricultural equipment
• Comparison references: 2085062, 152271, 470974, 481460, 440488

Before installation, it is recommended that you compare the dimensions of the new bearing with those of the removed part. The machine’s serial number should also be taken into account, as there may be several generations of designs within the same Väderstad product line.

What is the purpose of a bearing on a Väderstad machine ?

Ensure the guidance and rotation of mechanical components

A bearing is a mechanical component used to support and guide a shaft or rotating part. On tillage machines and seeders, these parts operate in a particularly demanding environment.

They are regularly exposed to:

• dust ;
• the earth ;
• humidity ;
• vibrations ;
• impacts ;
• lateral forces ;
• significant expenses ;
• long periods of operation.

A bearing in good condition helps maintain smooth rotation and minimize mechanical play. When it begins to wear out, the stress can gradually shift to the components surrounding the assembly.

Compatibility with Väderstad Carrier machines

Applications for CR Models

The CAM199366 bearing is particularly suitable for machines Väderstad Carrier CR 300 to CR 1225, paying special attention to the serial number.

The listed applications include:

Väderstad Carrier CR 300 to CR 1225, for the versions corresponding to the serial numbers specified for this assembly.

Väderstad Carrier CR 425, up to the serial number 2104.

The available information also mentions an application related to the machines with the numbers 2,500 to 7,399. Given that there are several mounting variations on Väderstad Carrier models, it is strongly recommended that you check the exact model, serial number, and bearing dimensions.

Compatibility with the various Väderstad product lines

Väderstad Carrier

The CAM199366 is designed for various configurations within the product line Väderstad Carrier.

Carriers are widely used for stubble cultivation, soil preparation, and crop residue management. The mechanical components of these machines are subjected to repeated stresses, particularly when operating at high speeds.

Väderstad Carrier Drill

The bearing is also listed for certain applications on Väderstad Carrier Drill.

This product line combines various functions related to crop preparation and planting. To correctly identify the required bearing, it is recommended that you check the part number of the disassembled bearing.

Väderstad Cultus

Part number CAM199366 is also recommended for use on cultivators Väderstad Cultus.

These machines are used for tillage and stubble cultivation. The bearings on the various mechanical components can be subjected to significant stress when working in heavy soils or under heavy loads.

Väderstad Seed Hawk

The CAM199366 bearing may also be suitable for certain machine applications Väderstad Seed Hawk.

For this product line, we recommend carefully checking the bearing's position on the machine and its part number before placing an order.

Väderstad Spirit

Certain seed drill configurations Väderstad Spirit are also covered by this reference.

Spirit seeders contain many moving parts whose proper operation depends on the condition of the bearings, hubs, and bushings. Excessive wear can cause play and disrupt the operation of the affected component.

Väderstad TopDown

CAM199366 is now approved for use in various applications involving soil-working implements Väderstad TopDown.

These combination machines typically operate under demanding conditions. Regular monitoring of mechanical components helps minimize the risk of downtime during operation.

Main Compatible Machines

Väderstad product lines covered

The CAM199366 bearing is listed for the following machine families:

• Väderstad Carrier
• Väderstad Carrier Drill
• Väderstad Cultus
• Väderstad Seed Hawk
• Väderstad Spirit
• Väderstad TopDown

For machines Carrier, the applications submitted specifically mention the following models CR 300 to CR 1225 as well as the CR 425, with serial number limits depending on the configuration.

Pay special attention to the serial number

There may be several generations of bearings

For agricultural machinery, a modification to the assembly process may occur during production without a major change to the machine's trade name.

That is why two Väderstad Carrier machines with the same model name may have different bearings depending on their year or serial number.

For CAM199366, the available usage information indicates, in particular:

• Carrier CR 300 through CR 1225 ;
• Carrier CR 425 up to serial number 2104 ;
• An installation instruction associated with machine numbers 2500 through 7399.

Before placing an order, the most reliable approach is therefore to compare the part number of the removed part, the dimensions, and the machine's serial number.

Difference from other Väderstad bearings with a diameter of 117 mm

Do not rely solely on the outer diameter

Several bearings designed for Väderstad machines may exhibit a the same outer diameter of 117 mm while having different mounting specifications.

The CAM199366 features, in particular:

• an outer diameter of 117 mm ;
• a total height of 62 mm ;
• a height h1 of 10 mm ;
• a 4-hole mounting with a diameter of 98 mm ;
• an M12 x 1.25 fitting ;
• a diameter range of 20–45 mm.

It is therefore important not to base your order solely on the outer diameter. The height, shaft diameter, center-to-center distance, and overall configuration must also match.

How can you tell if a bearing is worn out ?

Key Symptoms to Monitor

A bearing can wear out gradually over the course of several seasons. There are several signs that may indicate it needs to be replaced:

• excessive mechanical play ;
• abnormal lateral movement ;
• noise during rotation ;
• irregular rotation ;
• hard spot ;
• unusual vibrations ;
• Warm-up ;
• damage to the fasteners ;
• wear on the parts surrounding the bearing.

When play becomes noticeable, it is best to inspect the entire assembly promptly to prevent wear from damaging other components.

Tips for Replacing the Bearing

Check the entire assembly

When removing the old bearing, take this opportunity to inspect the related parts.

In particular, it is recommended that you check the following:

• the condition of the shaft ;
• support surfaces ;
• the fasteners ;
• threads ;
• the bolts ;
• the absence of deformation ;
• the interaction of neighboring components.

The mounting surfaces must be thoroughly cleaned before installing the new bearing.

Tightening the fasteners evenly also helps ensure that the part is properly positioned and prevents abnormal stress.

Comparison Part Numbers for the CAM199366 Bearing

Part Identification

To facilitate searching and identification, the CAM199366 bearing is associated with the following comparison part numbers:

2085062, 152271, 470974, 481460, 440488

These numbers can be used to identify an application, but it is still advisable to check the part's physical characteristics before placing an order, especially when the machine has undergone several assembly changes.

Order your Väderstad CAM199366 bearing from Camagris

The CAM199366 bearing is designed for various Väderstad machines used for seeding and tillage. With its 117 mm outer diameter, her 62 mm high and its mounting 4 x 98 mm, it serves as an alternative for compatible applications.

Camagris offers a wide range of spare parts for Väderstad machines, including, in particular, bearings, hubs, and various wear parts for tillage and seeding.

Specialist in agricultural replacement parts, Camagris offers fast shipping to France and throughout Europe, with a product line designed for farmers, agricultural contractors, and repair professionals.