MOTEUR ESSUIE GLACES

WIPER MOTOR FOR CASE IH, AND JOHN DEERE COMBINE HARVESTERS – PART NO. CAM199312

Cab windshield wiper motor for agricultural machinery

The CAM199312 windshield wiper motor is an electrical component designed to replace the windshield wiper motor installed on many Case IH and John Deere combine harvesters, as well as on certain John Deere self-propelled forage harvesters.

The windshield wiper system plays an important role in maintaining good visibility from the cab during harvest operations. Dust, rain, moisture, and splashes can quickly dirty the windshield of a combine harvester or forage harvester. A faulty wiper motor can make working conditions particularly uncomfortable.

Part number CAM199312 allows you to replace a worn-out or inoperable motor and restore normal operation of the wiper mechanism.

What is the windshield wiper motor used for?

To drive the cab’s wiper mechanism

The windshield wiper motor converts the machine’s electrical energy into mechanical motion to drive the wiper arm and blade.

When powered by the control located in the cab, the motor drives the mechanism to ensure the wiper blade moves smoothly across the windshield. Depending on the machine’s configuration, it may be connected to various components such as:

• a wiper arm;
• a wiper blade;
• a linkage or drive mechanism;
• an output shaft;
• a control switch;
• a wiring harness.

When replacing the wiper, it is recommended to inspect the entire mechanism to ensure that a sticking point or seized component is not the cause of the previous motor’s failure.

Compatibility with IH Case combine harvesters

1600 to 7000 Series

The CAM199312 windshield wiper motor is compatible with many models of IH Case combine harvesters.

1600 Series: 1660.

2100 Series: 2144, 2166, and 2188.

2300 Series: 2344, 2365, 2366, 2377, 2388, and 2399.

2500 Series: 2577 and 2588.

5000 Series: 5088 and 5130.

6000 Series: 6088 and 6130.

7000 Series: 7088 and 7130.

This broad coverage allows the CAM199312 motor to be used on several generations of IH Case harvesting machines.

Compatibility with John Deere combine harvesters

Models 1450 through 2266

The engine is compatible with the following John Deere models, among others:

1450, 1550, 1550 S, 1900, 2054, 2056, 2058, 2064, 2066, 2254, 2256, 2258, 2264, 2266, and 2266 Extra.

John Deere 9000 Series Combines

This part may also fit the following machines:

9400, 9410, 9450, 9500, 9500 SH, 9501, 9510, 9510 SH, 9550, 9550 SH, 9560, 9560 SH, 9600, 9610, 9650, 9660, and 9780.

CTS Series

Compatible with:

• John Deere 9650 CTS
• John Deere 9660 CTS
• John Deere 9780 CTS

CWS Series

Compatible with:

• John Deere 1450 CWS
• John Deere 1550 CWS

S Series

The CAM199312 windshield wiper motor is compatible with the following models:

• John Deere S560
• John Deere S690
• John Deere S690 HM

STS Series

Compatibility with combine harvesters:

• John Deere 9560 STS
• John Deere 9570 STS
• John Deere 9650 STS
• John Deere 9660 STS
• John Deere 9670 STS
• John Deere 9750 STS
• John Deere 9760 STS
• John Deere 9770 STS
• John Deere 9860 STS
• John Deere 9870 STS
• John Deere 9880 STS

T Series

Compatible with:

• John Deere T550
• John Deere T560
• John Deere T660
• John Deere T670

W Series

The engine can also be mounted on:

• John Deere W540
• John Deere W550
• John Deere W650
• John Deere W660

WTS Series

Compatible with:

• John Deere 1450 WTS
• John Deere 1550 WTS
• John Deere 9540 WTS
• John Deere 9560 WTS
• John Deere 9580 WTS
• John Deere 9640 WTS
• John Deere 9660 WTS
• John Deere 9680 WTS

Compatibility with John Deere self-propelled forage harvesters

5000 Series

The CAM199312 windshield wiper motor is also compatible with the following self-propelled forage harvesters:

• John Deere 5730
• John Deere 5830

This versatility makes it a suitable part for several families of John Deere harvesters.

When should you replace a windshield wiper motor?

The main symptoms of a faulty motor

A windshield wiper motor may gradually lose effectiveness before failing completely. Several symptoms may indicate that replacement is necessary:

• wiper blade is completely stationary;
• intermittent or irregular operation;
• abnormally slow movement of the wiper blade;
• motor overheating;
• unusual noise during operation;
• wiper blade stops in the middle of the windshield;
• the motor is powered but the wiper does not move.

Before replacing the part, it is recommended to check the fuse, the switch, the electrical connections, and whether power is present.

Inspect the mechanism before installation

Avoid premature damage to the new motor

When an old windshield wiper motor has burned out, it is important to identify the cause of the failure. A seized mechanism or one with excessive resistance can cause an electrical overload and quickly damage the new motor.

Before installing the CAM199312, be sure to check that the arm moves freely, inspect the condition of the drive shaft, and ensure there are no sticking points in the mechanism.

It is also advisable to check the condition of the wiper blade. A blade that is heavily worn, hardened, or ill-fitting can increase the force required to move across the windshield.

Checking Compatibility Before Ordering

Compare the mounting configuration with the part currently installed on the machine

Agricultural machines may have different configurations depending on their year of manufacture, target market, and cab equipment. For this reason, it is recommended to verify compatibility using the part number of the old motor, the exact model, and, if necessary, the machine’s serial number.

It is also helpful to visually compare:

• the general shape of the engine;
• the mounting points;
• the position of the output shaft;
• the electrical connection;
• the mounting dimensions.

This check ensures you select the correct part before permanently removing the old motor.

Order your CAM199312 windshield wiper motor from Camagris

Camagris offers a wide range of electrical parts and cab equipment for combine harvesters, forage harvesters, tractors, and other agricultural machinery: windshield wiper motors, arms, wiper blades, switches, lighting, electrical components, and cab parts.

The CAM199312 windshield wiper motor is compatible with a particularly wide range of harvesting machinery Case, IH, and John Deere—from older generations through several more recent series.

As a specialist in agricultural replacement parts, Camagris ships its products quickly throughout France and across Europe, offering a product line designed for agricultural professionals, agricultural contractors, and machinery repair shops.