30 MM WELD-ON MOUNT FOR NEW HOLLAND LM SERIES

The weld-on mounting bracket for the New Holland LM series is a raw mounting plate intended for the manufacture, adaptation, or repair of a material-handling attachment. With a thickness of 30 mm, this part is used on agricultural telescopic handlers to rebuild a hitch interface to be welded onto the relevant implement.

A mounting base for manufacturing or refurbishing an implement

This part is mounted on the attachment to create or replace the attachment point with the telescopic loader. It meets common workshop needs when it is necessary to return equipment to service, modify an existing attachment, or adapt a mounting to a machine in the LM series.

The uses specified for this part include, in particular:

• the fabrication of a specific bucket,
• adapting an attachment,
• repairing a damaged tool,
• modifying existing equipment.

With this type of attachment, the goal is to achieve a properly positioned connection between the machine and the tool, ensuring a functional assembly for agricultural handling tasks.

30 mm thick and raw mounting plate: key features of this part

This part is a weld-on attachment supplied as a raw mounting plate. It is not a finished accessory: it serves as the base component to be welded onto a bucket, fork, dump body, or other equipment designed for a telehandler.

The first selection criterion is its 30 mm thickness. This value must be compared to the existing attachment or the assembly planned for the implement. For an adaptation or repair, this check prevents the use of a part whose cross-section does not match the intended application.

The manufacturer designs this attachment to withstand the stresses encountered in agricultural material handling, particularly when handling silage, manure, pallets, or bulk materials. It is therefore suitable for applications where the attachment is used regularly on a telehandler.

Application on New Holland LM Series Telescopic Handlers

This attachment is designed for New Holland LM Series telehandlers. A detailed list of compatible models is included with the product sheet so you can verify compatibility directly by machine designation.

If you are replacing a worn-out attachment or taking over a tool already in service, first verify that it matches your LM model and the type of accessory to be installed. For a part of this type, identifying the machine and taking its thickness into account are the most useful guidelines before proceeding.

Practical Guidelines Before Welding the Clamp

Before final welding, it is helpful to verify the part’s alignment with the attachment, as well as the flatness and squareness of the assembly. These points help ensure the attachment is positioned correctly and that forces are distributed evenly during use.

The source also recommends a weld suitable for high loads and adherence to the telehandler’s lifting capacity. These precautions are particularly important when repairing a material-handling tool or adapting an attachment for a different use. To select the correct part number, compare your current setup, your LM series model, and the desired thickness before beginning workshop work.

Dimensions and Technical Specifications

• Thickness: 30 mm
• Thickness: 30 mm

Compatibility by Brand and Series

New Holland · LM Series

• LM1060
• LM1133
• LM1330
• LM1333
• LM1340
• LM1445
• LM1740
• LM1745
• LM410
• LM415A
• LM420
• LM420A
• LM425A
• LM430
• LM435A
• LM445A
• LM500
• LM5040
• LM5060
• LM5080
• LM640
• LM732
• LM840
• LM860

FAQ — Frequently Asked Questions

What is this welded attachment for the New Holland LM telescopic handler used for?

It is used to create or replace the attachment interface for an accessory on a New Holland LM Series telescopic handler. This raw mounting plate is welded to the implement to create a mounting, repair a worn attachment, or adapt existing equipment for agricultural material handling.

Is this part compatible with the New Holland LM420A and LM5060?

Yes, the LM420A and LM5060 models are listed among the compatible models for this weld-on mounting plate. To ensure you’ve selected the correct part, also verify the exact model designation of your LM Series machine and the thickness of the mounting plate you need before welding.

Is a thickness of 30 mm an important factor to consider?

Yes, a 30 mm thickness is a decisive factor in selecting this part number. Compare it with your existing attachment or with the planned mounting on the tool to ensure a consistent interface with your telehandler and the intended material-handling task.

Can it be used on a bucket, fork, or dump body?

Yes, this attachment is designed to be welded onto a bucket, fork, dump body, or other agricultural equipment. It is suitable for manufacturing, adaptation, modification, or repair operations, provided that the geometry of the tool and the machine is respected.

Original spare part numbers and brand names are provided for comparison purposes only. This does not imply that these are original parts.