SB1 SCREW KIT FOR INSTALLING THE 4TH DISTRIBUTOR

This SB1 assembly screw kit is designed for mounting the fourth valve on the relevant assembly. It meets a specific need: providing the appropriate screw lengths to complete or rebuild a 4-piece block assembly. To select the correct kit, first verify the SB1 application and the exact dimensions of the fasteners provided.

Screws and bolts for assembling the fourth valve

In this product family, the assembly hardware is used to join the components of a valve and ensure the assembly is correctly mounted. Here, the specified use is clearly the assembly of the 4th distributor. This detail is important because screw lengths vary depending on the block configuration and the number of components to be assembled.

Whether you are replacing a missing screw or completing an existing assembly, determining the number of components is the first step. Screws that are too short or too long may prevent the assembly from conforming to the intended configuration.

Kit Contents and Dimensions to Check

The kit includes only the fasteners specified for this application:

• 2 x M8 x 230
• 1 x M8 x 180

These lengths are the most useful reference for selection. Before ordering, compare them with your current assembly or with the part number of your SB1 assembly. The M8 thread and the lengths of 230 mm and 180 mm are the key specifications to ensure a proper fit.

Listed Tractor Applications

This part number is listed for various tractor applications. The listed compatibilities include numbered models, BD models such as D440, D320 through D436, Fendt the 200, 200 Vario, Farmer 200, and Favorit 600 series, as well as the Hurlimann Prestige and Same Explorer II. Model variants and suffixes must be compared exactly to confirm proper installation.

There is only one caveat to keep in mind during verification: while the presence of a model in the list aids in identification, it is still essential to verify the SB1 assembly and the number of components.

Useful Guidelines Before Ordering

To select the correct part number, check three points: the “SB1” designation, whether it is intended for a 4-element configuration or for mounting the 4th valve, and the exact contents of the kit. If you require a different valve configuration, the fasteners may differ.

If you’re unsure, compare your specific setup and the screw lengths directly before confirming the part number.

Compatibility by Make and Model

Listed models

• 23
• 323
• 423
• 523
• 24
• 624
• 724
• 824
• 33
• 433
• 533
• 633
• 733
• 833
• 40
• 440
• 540
• 640
• 740
• 840
• 940
• 43
• 743
• 743XL
• 44
• 644
• 744
• 844
• 844S
• 844XL
• 45
• 745S
• 745XL
• 845
• 845XL
• 53
• 353
• 453
• 553
• 54
• 554
• 654
• 55
• 1055
• 1055XL
• 1255
• 1255XL
• 955
• 955XL
• 83
• 383

BD

• D440
• Classic
• D320
• D322
• D324
• D326
• D430
• D432
• D436

Fendt

• 200
• 206V/NA
• 207V/NA
• 208P/NA
• 208V/NA
• 209V/NA
• 200 Vario
• 209P
• Farmer 200
• 200S
• 200SA
• 200V
• 200VA
• 201S
• 201SA
• 203P
• 203P/II
• 203PA
• 203PA/II
• 203V
• 203V/II
• 203VA
• 203VA/II
• 204P
• 204PA
• 204V
• 204VA
• 205P
• 205PA
• 206VA
• 240S
• 250K
• 250KA
• 250LE
• 250S
• 250SA
• 250V
• 250VA
• 260P
• 260PA
• 260S
• 260SA
• 260V
• 260VA
• 270P
• 270PA
• 270V
• 270VA
• 275SA
• 275V
• 275VA
• 280P
• 280PA
• 280S
• 280SA
• 280V
• 280VA
• Favorit 600
• 600LS
• 600LSA
• 610LS
• 610LSA
• 610S
• 610SA
• Hurlimann
• Prestige
• H358 Prestige
• H468 Prestige
• H478 Prestige
• H488T Prestige

Same

• Explorer II
• Explorer 60 II
• Explorer 70 II
• Explorer 80 II
• Explorer 90 II
• Contents
• 2x M8 x 230
• 1x M8 x 180

FAQ — Frequently Asked Questions

What exactly does this SB1 assembly screw kit contain?

This kit contains three assembly screws: 2 M8 x 230 screws and 1 M8 x 180 screw. This configuration is intended for mounting the 4th valve on an SB1 assembly. Be sure to verify these lengths before ordering to ensure the screws are suitable for your assembly.

What does “installation of the 4th valve” mean?

It indicates that these fasteners are designed to add or mount a fourth valve on an SB1 assembly. In this type of assembly, the length of the screws is critical, as it depends on the number of components to be held together on the relevant block.

How can I verify that this fastener set is compatible with my SB1 assembly?

The first thing to check is the “SB1” designation on your assembly or in your documentation. Next, confirm that you are working with a 4-component configuration and compare the provided dimensions: 2 M8 x 230 screws and 1 M8 x 180 screw.

Which tractors are specifically listed for this part number?

The listed applications include models numbered 23, 323, 423 through 383, as well as the BD D440, D320, D322, D324, D326, D430, D432, and D436, as well as the Fendt, 200, 200 Vario, Farmer 200, Favorit 600, Hurlimann Prestige, and Same Explorer II. Compare each part number exactly.

The original spare part numbers and brand names are provided solely for comparison purposes. This does not imply that these are original parts.