BRAKE RECEIVER CYLINDER FOR DEUTZ 04396512

Brake Receiver Cylinder for Deutz Tractors

Brake master cylinder 04396512 is designed for Deutz tractors equipped with a rear brake disc. This part is part of the braking system and is selected primarily by its part number and by ensuring it is compatible with the correct model. It is compatible with several tractors in the Agrocompact, Agroxtra, and DX families, as well as certain Hopfen models listed in the compatibility section of this product sheet.

Role of the brake master cylinder in the rear braking system

In a braking system, a master cylinder receives hydraulic pressure and transmits it to the mechanism to be actuated. For this part number, the specified application is the rear disc brake. When replacing this part, the goal is to ensure the control system matches the tractor’s original assembly, without any guesswork regarding the part number or model variant.

This type of part is generally sought when overhauling the rear braking system or replacing a component that has become inoperable. For such a specific part number, precise identification of the tractor remains the primary selection criterion.

Deutz Applications Covered by Part Number 04396512

This part number is used on several Deutz tractors. Documented applications include models from the following families:

• Agrocompact
• Agroxtra
• DX3 in SC, VC, V/F, and S variants, depending on the listed models
• DX4 and DX6 for certain specified applications
• Hopfen on versions listed in the compatibility chart

The detailed list of models follows the description. It provides the exact part numbers, including variant suffixes, which are essential for selecting the correct part without unduly extending compatibility to an entire series.

Key identifiers for selecting this part

To order the correct receiver cylinder, start by checking part number 04396512 on your old part or in your maintenance manual. Next, note the exact tractor model, including its full suffix: SC, VC, V/F, or S, as applicable. These designations are not minor details; they are used to distinguish between different versions within the same model family.

You must also confirm that you need a rear brake disc. This specification helps rule out errors involving other components of the braking system, especially when multiple part numbers exist for the same generation of tractors.

When should a brake master cylinder be replaced?

This part is most often replaced during a rear brake repair, after wear is detected, or when the existing cylinder is no longer functional. With this type of component, careful identification prevents you from installing a part that does not exactly match the tractor or the specific model in question.

Before finalizing your selection, check the part number, the complete Deutz model designation, and whether it is intended for the rear brake. These three points are generally sufficient to confirm that you are selecting the correct brake master cylinder.

Before ordering, simply verify part number 04396512 and the exact model of your tractor to ensure you select the correct part.

Compatibility by Brand and Series

Deutz · Tractor

• Agrocompact 3.50S
• Agrocompact 3.50V/F
• Agrocompact 3.70V/F
• Agrocompact 3.90F
• Agrocompact 3.90S
• Agroxtra 3.57
• Agroxtra 4.07
• Agroxtra 4.17
• DX3.10SC
• DX3.10VC
• DX3.30SC
• DX3.30VC
• DX3.50S
• DX3.50SC
• DX3.50VC
• DX3.60SC
• DX3.60VC
• DX3.65SC
• DX3.65VC
• DX3.70V/F
• DX3.75VC
• DX3.80SC
• DX3.90F
• DX3.90S
• DX4.11
• DX6.50
• Hopfen DX4.17

FAQ — Frequently Asked Questions

What is the purpose of this brake master cylinder on a Deutz tractor?

This brake master cylinder transmits hydraulic pressure to the corresponding braking mechanism. For this part number, the specified application is the rear brake disc. It is therefore used when repairing the rear braking system on Deutz models listed for part number 04396512.

Is part number 04396512 compatible with a Deutz Agrocompact 3.50S or a DX6.50?

Yes, the Agrocompact 3.50S and the DX6.50 are among the applications documented for this part number. Other Deutz models are also included. To avoid mistakes, always check the tractor’s full model designation and the part number listed on the part being replaced.

Why is it important to check for the suffixes SC, VC, V/F, or S on the DX and Agrocompact series?

These suffixes are an integral part of the tractor’s identification and must not be ignored. A DX3.50SC, a DX3.50VC, and a DX3.50S do not refer to the same variant. To select this brake master cylinder, use the exact model as it appears on the tractor.

How can you identify the correct part before ordering this brake master cylinder?

The key identifier is part number 04396512, which must be confirmed against the exact model of the Deutz tractor in question. Also verify that you are searching for a brake master cylinder intended for the rear brake disc. This double-check helps prevent errors during replacement.

Original replacement part numbers and brand names are provided for comparison purposes only. This does not imply that these are original parts.