BRAKE RECEIVER CYLINDER FOR FENDT G380132070250

Brake Receiver Cylinder for Fendt, Farmer, and F380GT

This adaptable brake master cylinder, part number G380132070250, is designed for use in several applications Fendt, including Farmer 310 and Farmer 311 tractors as well as implement carriers from the F380GT series. It is installed in the hydraulic braking system and is identified by a mounting center distance of 78 mm and a grease fitting center distance of 62.5 mm—two measurements that are useful when replacing the part.

What is the role of this part in the braking system?

A brake slave cylinder receives the pressure sent by the master cylinder and converts it into mechanical movement at the brake. It therefore plays a direct role in operating the hydraulic braking system. On a tractor or implement carrier, its good condition is just as important for braking efficiency as it is for consistent pedal response.

When this part is worn or leaking, the system may lose efficiency. It is therefore advisable to inspect the relevant assembly before reassembly, following the procedure specified for the equipment.

Useful guidelines for selecting the correct part number

For this part number, the most helpful identification methods are comparing it with the old part and checking the visible dimensions.

• PartNumber: G380132070250
• Mounting center distance: 78 mm
• Center-to-center distance of grease fittings: 62.5 mm

These two measurements help distinguish this brake master cylinder from other similar assemblies. If your old cylinder has the same part number and the same center distances, you already have a very good point of reference before placing your order.

Applicable Fendt s

This part is designed for equipment Fendt used for agricultural towing and as implement carriers. It corresponds to documented setups on the Farmer 310 and Farmer 311 series, including variants such as LSA or TURBOMATIK, as well as on the F380GT series with its GTA and GTH variants.

If you are working on a Farmer or GT of this generation, verifying the part number and center distances remains the safest way to confirm proper installation, especially when several similar versions exist under the same model name.

When should replacement be considered?

Replacing a brake master cylinder is generally necessary when a leak occurs or when braking becomes uneven. Common signs include fluid leakage, a softer brake pedal, uneven braking, or an abnormally long pedal travel.

Before finalizing your choice, compare part number G380132070250,the 78 mm mounting center distance, andthe 62.5 mm grease nipple center distance with the part you removed. This simple check helps ensure you select the correct master cylinder for your vehicle Fendt.

Dimensions and Technical Specifications

• 78 mm
• 62.5 mm

Compatibility by brand and series

Fendt · Tool Holders

• F380GT
• F380GTA
• F380GTH

Fendt · Tractor

• Farmer 310 LSA
• Farmer 310 TURBOMATIK
• Farmer 311 LSA
• Farmer 311 TURBOMATIK

Fendt

• Compatible brand
• Farmer 310
• Farmer 311

Fendt · Farmer Series

• 300

FAQ — Frequently Asked Questions

What is the purpose of a brake slave cylinder on these machines Fendt?

The brake receiver cylinder converts hydraulic pressure from the master cylinder into mechanical action on the braking mechanism. It is a component directly involved in brake operation. On this model, identification is also based on part number G380132070250 and by verifying the two specified center distances.

Is this cylinder compatible with the Fendt Farmer 310 LSA, Farmer 311 TURBOMATIK, and F380GTA models?

Yes, these models are among the applications documented for this part number. This includes, in particular, Farmer 310 and 311 models depending on the version—including LSA and TURBOMATIK variants—as well as the F380GT, F380GTA, and F380GTH implement mounts. Always compare the part number and center distances before ordering.

How can I identify this brake receiver cylinder part number?

Identification is based first on the part number G380132070250, then on the relevant dimensions measured on the removed part. This version has a mounting center distance of 78 mm and a grease nipple center distance of 62.5 mm. These details help prevent confusion between similar assemblies.

What signs might indicate that a brake master cylinder needs to be replaced?

Common signs include a fluid leak, an abnormally soft brake pedal, uneven braking, or a longer-than-usual pedal travel. If any of these symptoms appear, it is advisable to check the condition of the cylinder and the integrity of the brake system.

Original replacement part numbers and brands are provided for comparison purposes only. This does not imply that these are original parts.