STABILIZER ARM BRACKET FOR CASE IH MAXXUM AND MX MAXXUM 114418A2

The right stabilizer bracket 114418A2 is mounted on the lift of IH Case tractors in the Maxxum and MX Maxxum series. This part serves as the mounting point for the stabilizer on the right side. It should be replaced if a bracket is bent, cracked, missing, or no longer fits properly; the primary identification markers are part number 114418A2 and the mounting location on the tractor.

A right-side stabilizer mounting point

Within the lift stabilization assembly, the bracket receives and secures the component that limits the lateral movement of the mounted implement. Its role is simple yet important: it helps guide the stabilizer on that side and ensures the assembly remains properly secured during normal tractor operation.

When this support point develops play, becomes twisted, or is damaged due to stress, lateral stability may become less consistent at that location. Replacing the support restores the entire right-side assembly to proper working order; be sure not to confuse this part with the left-side version.

Part Number 114418A2 and Application Case, IH

This part number is intended for Case, IH Maxxum, and MX Maxxum tractors. The number 114418A2 remains the most direct reference for comparing the removed part, your parts documentation, or your workshop identification.

The designation “right” is not a minor detail. It indicates the actual mounting position on the tractor. A right bracket and a left bracket belong to the same assembly, but they are not interchangeable. If you are working on a lift that has already been repaired, be sure to verify that the part currently in place still matches the intended installation before ordering.

For tractors within the same model family, the commercial name alone is not always sufficient. The exact model designation, combined with the comparison part number, remains the surest way to avoid installation confusion.

When should it be replaced?

Replacement is generally considered when a mount is deformed, cracked, or shows wear at the contact point, or when it is missing following a previous repair. On a tractor used with mounted implements, this area is subjected to repeated stress and warrants careful inspection as soon as play develops in the stabilization system.

After an impact, abnormal wear, or less smooth operation of the lift on that side, it is advisable to check the condition of both the stabilizer and its mounting components at the same time. This helps prevent replacing a bracket without addressing the root cause of the issue observed in the assembly.

Important points to check before ordering this part

• Confirm part number 114418A2 on the old part or in the parts catalog;
• verify that it is indeed the right side;
• verify compatibility with your IH Case r tractor from the relevant series;
• examine the condition of the stabilizer and fasteners if the mount has been operating with play.

This type of mount should not be selected based solely on its general appearance, as similar-looking parts may correspond to the opposite side or a different mounting configuration. Compare your old mount, the tractor identification, and the part number before proceeding to ensure you select the correct part.

Compatibility by Make and Series

Case

• IH Maxxum
• 5120
• 5130
• 5140
• 5150
• 5220
• 5230
• 5240
• 5250
• MX100
• MX100C
• MX110
• MX120
• MX135
• MX80C
• MX90C

Case IH

• Why Choose the 114418A2 Straight Stabilizer Bracket?

FAQ — Frequently Asked Questions

What is the purpose of a right-side stabilizer bracket on the hitch?

It serves as a mounting point for the stabilizer on the right side of the hitch. In this assembly, the stabilizer limits the lateral movement of the mounted implement; if the mount is worn, deformed, or missing, stability on that side may become less consistent.

How can I confirm that part number 114418A2 corresponds to the right-hand version?

The first step is to verify part number 114418A2 on the removed part or in your parts catalog. You must then confirm the installation position on the tractor, as the “right” designation refers to the actual installation side and does not replace a visual inspection.

Which IH Case tractors are associated with this part number?

This part number is associated with the IH Maxxum Case 5120, 5130, 5140, 5150, 5220, 5230, 5240, and 5250, as well as the MX80C, MX90C, MX100, MX100C, MX110, MX120, and MX135. Also check the right side before replacing the part.

Under what circumstances is this stabilizer mount typically replaced?

It is replaced when it is cracked, bent, worn at the contact point, or missing following a previous repair. If the lift has abnormal play or if this area has been struck by an impact, it is advisable to inspect the stabilizer and its associated mountings at the same time.

Original replacement part numbers and brand names are provided for comparison purposes only. This does not imply that these are original parts.