COMPLETE PISTON RING KIT FOR FIAT IVECO 8035.06, 8045.06, AND 8065.06

The complete piston sleeve kit for the Iveco Fiat, models 8035.06, 8045.06, and 8065.06, is designed for overhauling the upper engine in various applications Fiat. This kit includes a semi-finished dry sleeve, a piston, and 3 piston rings. To select the correct part number, the installation dimensions and engine code remain the most useful reference points before replacement.

A kit designed for cylinder liner and piston overhaul

In an engine, the cylinder liner-piston assembly guides the piston’s movement within the cylinder and works with the piston rings to ensure combustion sealing. During a rebuild, replacing these components provides a consistent foundation when wear necessitates replacing the entire assembly rather than performing isolated repairs.

This part number applies to the following engines Fiat, Iveco 8035.06, 8045.06, and 8065.06, installed in several tractors Fiat. If your machine has had an engine replacement or a previous repair, it is best to verify the engine code stamped on the engine block before selecting this version.

Key dimensions for identifying the correct version

The documented dimensions are key to distinguishing this kit from other similar assemblies:

• Ø 100 mm
• 38 x 85 mm for the piston pin
• 49.1 mm for the combustion chamber diameter
• 22.7 mm for the combustion chamber depth

These values allow you to compare the part currently installed with the part number you are looking for. They are particularly useful when multiple variants exist within the same engine family. The term “dry liner” specifies the type of liner, while the designation “semi-finished” is part of the definition of this part number.

Application guidelines and comparison part numbers

This kit is compatible with the following applications Fiat, equipped with the engines listed above. The associated comparison part numbers are 4770654, 1930241, and 1930169. They can help you match this part to a previous assembly or a part number already noted on a prior order.

The presence of 3 segments is also an identifying feature to consider when comparing the old assembly. For this type of repair, the fit between the cylinder liner, the piston, and the combustion chamber geometry is just as important as the engine’s general designation.

Make Sure to Choose Carefully Before Ordering

Before confirming this part number, first check the Iveco engine code ( Fiat ), then compare the key dimensions: bore, pin diameter, and combustion chamber specifications. This simple check prevents mismatches between two versions that appear similar at first glance.

If you are looking for a complete piston sleeve kit for an Iveco Fiat 8035.06, 8045.06, or 8065.06 engine, use these dimensions and the comparison part numbers to confirm a proper fit.

Dimensions and Technical Specifications

• Ø 100 mm
• 38 x 85 mm
• 49.1 mm
• 22.7 mm

Compatibility by Make and Model

FIAT

• 55-46
• 65-46
• 70-65
• 45-66
• 50-66
• 55–66
• 65-66
• 70–66
• 55–76
• 70–76
• 55–90
• 70–90
• 100–90
• 72–93
• 72–94 L 65
• SEMI-FINISHED SHIRT
• dry shirt

FAQ — Frequently Asked Questions

Which engines is this complete piston liner kit compatible with?

This kit is designed for the following engines Fiat, Iveco 8035.06, 8045.06, and 8065.06.. These are the first specifications to confirm before ordering, especially if the tractor has already had an engine replacement or a previous repair using parts with different dimensions.

What dimensions should be checked before replacing the assembly?

The key dimensions to compare are the cylinder liner bore (Ø 100 mm), the piston pin dimensions (38 x 85 mm), the combustion chamber diameter (49.1 mm), and its depth (22.7 mm). These measurements help identify the correct version during an engine rebuild.

What does the term “semi-finished dry liner” mean?

The liner specified here is a dry liner, meaning a liner mounted in the block without direct contact with the coolant. The term “semi-finished” is part of this part number’s designation and must be included exactly as written when identifying the part.

What are the purposes of part numbers 4770654, 1930241, and 1930169?

These numbers serve as comparison references for identifying the kit. They allow you to match this part to an existing assembly or a previous order. It is still recommended to check the engine code and the main dimensions of the piston and cylinder liner at the same time.

Original replacement part numbers and brand names are provided for comparison purposes only. This does not imply that the parts are genuine.