MUDGUARD SUPPORT ARM FOR JOHN DEERE L212528

The L212528 mudguard support arm is an adaptable part designed for use on many John Deere tractors. It is used to support the mudguard and can be mounted on either the right or left side. This part is used in conjunction with mudguard brackets AL208466 and AL208465 on a wide range of models in the 6000, 6010, 6020, 6005, 6M, 6RC, 6R series, and the 7330.

Securing the Mudguard to the Tractor

This arm helps secure the mudguard and ensure its proper positioning on the machine. On this type of assembly, a bracket in good condition helps maintain a clean and stable installation, particularly when the tractor is working in mud, dealing with splashes, or undergoing repeated travel on roads and in the field.

Replacement is necessary when the existing arm is bent, cracked, or no longer properly secures the assembly. Repairing this mounting point restores proper support to the mudguard without requiring a complete overhaul of the entire assembly if the rest of the equipment is still in good condition.

A ambidextrous part number to simplify replacement

The main advantage of part number L212528 is its ambidextrous design. The same arm can be used on either the right or left side, which simplifies part identification during repairs and eliminates the need to search for two separate part numbers for the arm itself.

This component is compatible with mounts AL208466 and AL208465. Before ordering, it is therefore advisable to also check the configuration of the mudguard mount already installed on the tractor, especially if the machine has undergone a previous repair or a partial replacement of the assembly.

Applicable John Deere Models

This part is compatible with many John Deere model lines. It is used on models in the 6000, 6010, 6020, 6005, 6M, 6RC, and 6R series, as well as on the 7330. A detailed list of compatible models is included with the product sheet, allowing you to verify your tractor’s compatibility before confirming your selection.

This wide range of applications makes it a frequently sought-after part for routine maintenance, but it does not replace the need for a thorough inspection of the machine. Part number L212528 remains the primary reference to compare with the part being replaced or with your maintenance documentation.

Useful Information Before Ordering

To select the correct fender support arm, first verify the part number you’re looking for, then the side in question, and the associated mounting part numbers. The fact that this arm is the same for both sides does not eliminate the need to verify the entire assembly, particularly around the corresponding fender mounts.

If you are looking for a support arm for a John Deere model listed in the intended applications, this part number serves as a clear identifier. If in doubt, compare the existing assembly with part number L212528 before proceeding, then follow the maintenance procedure appropriate for your tractor.

Dimensions and Technical Specifications

• 6105 M
• 6110 M
• 6115 M
• 6120 M
• 6125 M
• 6130 M
• 6140 M
• 6,150 M
• 6170 M

Compatibility by Brand and Series

John Deere · 6000 Series

• 6100
• 6200
• 6200 L
• 6300
• 6300 L
• 6400
• 6400 L
• 6500
• 6,500 L

John Deere · 6010 Series

• 6010
• 6010 SE
• 6110
• 6110 L
• 6110 SE
• 6210
• 6210 L
• 6210 SE
• 6310
• 6310 L
• 6310 S
• 6310 SE
• 6410
• 6410 L
• 6410 S
• 6410 SE
• 6510
• 6510 L
• 6510 S
• 6510 SE
• 6610
• 6610 SE
• 6810
• 6910
• 6910 S

John Deere · 6020 Series

• 6020
• 6120
• 6120 L
• 6220
• 6220 L
• 6320
• 6320 L
• 6320 SE
• 6420
• 6420 L
• 6420 SE
• 6520
• 6520 L
• 6620
• 6620 SE
• 6820
• 6920
• 6920 S

John Deere · 7030 Series

• 7330

John Deere · 6005 Series

• 6205
• 6215
• 6405
• 6415
• 6505
• 6515
• 6605
• 6615
• 6715

John Deere · 6M Series

• 6090 MC
• 6105 M
• 6110 M
• 6115 M
• 6120 M
• 6125 M
• 6130 M
• 6140 M
• 6150 M
• 6170 M

John Deere · 6RC Series

• 6090 RC
• 6100 RC
• 6110 RC

John Deere · 6R Series

• 6105 R
• 6110 R
• 6120 R
• 6125 R
• 6130 R
• 6135 R
• 6140 R
• 6145 R
• 6150 R
• 6150 RH
• 6155 R
• 6155 RH
• 6170 R
• 6175 R
• 6190 R
• 6195 R
• 6210 R
• 6215 R

FAQ — Frequently Asked Questions

Can this L212528 support arm be mounted on either the right or left side?

Yes. Part number L212528 is designed for ambidextrous mounting, allowing it to be used on either the right or left side. However, it is designed to be used with the AL208466 and AL208465 fender brackets; therefore, you must check the mounting assembly already installed on the tractor.

Which part numbers is this fender bracket compatible with?

This arm is recommended for use with mudguard brackets AL208466 and AL208465. These part numbers correspond to the mounting configuration around the fender, depending on which side is equipped. If you are replacing multiple parts at once, compare the part numbers already installed to avoid an incomplete or improper assembly.

Is this bracket compatible with the John Deere 6105 M, 6125 M, 6140 M, and 6170 M?

Yes, these models are among the applications listed for part number L212528. Compatibility also extends to other John Deere tractors in the 6000, 6010, 6020, 6005, 6M, 6RC, and 6R series, as well as the 7330. However, please verify the part number you are looking for if the mounting has already been modified.

When should a fender support arm be replaced?

Replacement is generally recommended when the arm is bent, cracked, or when the fender is no longer properly secured. With this type of component, deformation can interfere with the assembly’s proper positioning. A visual inspection of the existing bracket helps confirm whether replacement is necessary.

Original replacement part numbers and brand names are provided for comparison purposes only. This does not imply that these are original parts.