LOW-PRESSURE DIAPHRAGM PUMP FOR THE COMET BP151K SPRAYER
Ref.: CPCR14421
In stock from supplier, Ships within 4 to 7 days
Low-pressure diaphragm pump for sprayers, Comet model BP151K. This version features 4 diaphragms, a 1 3/8" M through-shaft, mounting feet, a flow rate of 138 l/min at 540 rpm, and a pressure of 20 bar.
Low-pressure diaphragm pump for sprayers, Comet model BP151K. This version features 4 diaphragms, a 1 3/8" M through-shaft, mounting feet, a flow rate of 138 l/min at 540 rpm, and a pressure of 20 bar.
- Free quotation
- French company
Product's description
Product's descriptionThe Comet BP151K low-pressure diaphragm pump is designed for use in a sprayer. This model features a 4-diaphragm configuration, a 1"3/8M through-shaft, and a foot-mounted design. It is rated for a flow rate of 138 l/min at 540 rpm and a pressure of 20 bar—two key specifications to help you find a pump suited to your system.
A sprayer pump designed for low-pressure systems
In a sprayer, a diaphragm pump supplies liquid to the system and helps generate the pressure required for spraying. The BP151K belongs to this family of pumps and is therefore intended for setups that require a low-pressure pump with well-defined specifications.
Choosing a replacement pump is not limited to the product model number. The flow rate available at a given speed, the rated pressure, and the drive type are critical factors for ensuring consistent operation with the existing equipment.
Key Specifications for the BP151K
This Comet pump features several useful identification details:
- Model: BP151K
- Type: 4-diaphragm pump
- Drive: 1"3/8M through-shaft
- Mounting: with feet
- Flow rate at 540 rpm: 138 l/min
- Pressure: 20 bar
- Special feature: no PDF protection
This information allows you to compare the pump with the one installed on your machine, especially when several similar variants exist within the same family of spray pumps.
Be sure to verify the details before replacing your pump
To select this part number, start by checking the designation BP151K and the pump’s general design. The 1-3/8" M through-shaft is a key identifier, as is the presence of mounting feet. The values of 138 l/min at 540 rpm and 20 bar also serve as a basis for comparison with your sprayer’s requirements.
The notation “without PDF protection” must also be taken into account. If your installation includes a PTO guard, check the installed equipment before reassembly. There is only one caveat here: in the absence of other mounting dimensions or connection information, it is best to compare the existing pump point by point.
A useful guide for sprayer maintenance
A worn-out spray pump can cause an irregular flow to the system or make it difficult to reach the desired pressure level. When replacing the pump, finding the correct mechanical configuration prevents the need to modify the existing setup.
If you’re looking for a low-pressure diaphragm pump with 4 diaphragms, a 1"3/8M through-shaft, 138 l/min at 540 rpm, and 20 bar, the BP151K is a clear reference point. Before placing an order, simply compare these specifications with your current pump and the configuration of your sprayer.
Dimensions and Technical Specifications
- 3/8M
FAQ — Frequently Asked Questions
What is the BP151K low-pressure diaphragm pump used for?
This pump is designed for use in a sprayer system. It supplies and pressurizes the liquid in a sprayer, with a rated flow rate of 138 l/min at 540 rpm and a pressure of 20 bar, making it a useful reference for replacement.
What features allow you to correctly identify the BP151K before ordering?
Identification is based first on the model number BP151K, then on its visible and numerical specifications. Check for the presence of the 4 diaphragms, the 1 3/8" M through-shaft, the foot-mounted design, and the specified operating values to confirm that this part number matches your unit.
What does the “without PTO protection” notation on this pump mean?
This means the pump is specified without a PTO guard. If your setup requires this device, you must verify its presence on the existing installation or provide the appropriate equipment based on your machine’s configuration and the manufacturer’s instructions.
Is this pump suitable for a sprayer?
Yes, the BP151K is specifically marketed as a diaphragm pump for sprayers. To ensure it is a suitable replacement, be sure to compare the 1"3/8M through-shaft drive type, the foot-mounted design, and the flow rate and pressure required by your equipment.
Original replacement part numbers and brand names are provided for comparison purposes only. This does not imply that these are original parts.
The Comet BP151K low-pressure diaphragm pump is designed for use in a sprayer. This model features a 4-diaphragm configuration, a 1"3/8M through-shaft, and a foot-mounted design. It is rated for a flow rate of 138 l/min at 540 rpm and a pressure of 20 bar—two key specifications to help you find a pump suited to your system.
A sprayer pump designed for low-pressure systems
In a sprayer, a diaphragm pump supplies liquid to the system and helps generate the pressure required for spraying. The BP151K belongs to this family of pumps and is therefore intended for setups that require a low-pressure pump with well-defined specifications.
Choosing a replacement pump is not limited to the product model number. The flow rate available at a given speed, the rated pressure, and the drive type are critical factors for ensuring consistent operation with the existing equipment.
Key Specifications for the BP151K
This Comet pump features several useful identification details:
- Model: BP151K
- Type: 4-diaphragm pump
- Drive: 1"3/8M through-shaft
- Mounting: with feet
- Flow rate at 540 rpm: 138 l/min
- Pressure: 20 bar
- Special feature: no PDF protection
This information allows you to compare the pump with the one installed on your machine, especially when several similar variants exist within the same family of spray pumps.
Be sure to verify the details before replacing your pump
To select this part number, start by checking the designation BP151K and the pump’s general design. The 1-3/8" M through-shaft is a key identifier, as is the presence of mounting feet. The values of 138 l/min at 540 rpm and 20 bar also serve as a basis for comparison with your sprayer’s requirements.
The notation “without PDF protection” must also be taken into account. If your installation includes a PTO guard, check the installed equipment before reassembly. There is only one caveat here: in the absence of other mounting dimensions or connection information, it is best to compare the existing pump point by point.
A useful guide for sprayer maintenance
A worn-out spray pump can cause an irregular flow to the system or make it difficult to reach the desired pressure level. When replacing the pump, finding the correct mechanical configuration prevents the need to modify the existing setup.
If you’re looking for a low-pressure diaphragm pump with 4 diaphragms, a 1"3/8M through-shaft, 138 l/min at 540 rpm, and 20 bar, the BP151K is a clear reference point. Before placing an order, simply compare these specifications with your current pump and the configuration of your sprayer.
Dimensions and Technical Specifications
- 3/8M
FAQ — Frequently Asked Questions
What is the BP151K low-pressure diaphragm pump used for?
This pump is designed for use in a sprayer system. It supplies and pressurizes the liquid in a sprayer, with a rated flow rate of 138 l/min at 540 rpm and a pressure of 20 bar, making it a useful reference for replacement.
What features allow you to correctly identify the BP151K before ordering?
Identification is based first on the model number BP151K, then on its visible and numerical specifications. Check for the presence of the 4 diaphragms, the 1 3/8" M through-shaft, the foot-mounted design, and the specified operating values to confirm that this part number matches your unit.
What does the “without PTO protection” notation on this pump mean?
This means the pump is specified without a PTO guard. If your setup requires this device, you must verify its presence on the existing installation or provide the appropriate equipment based on your machine’s configuration and the manufacturer’s instructions.
Is this pump suitable for a sprayer?
Yes, the BP151K is specifically marketed as a diaphragm pump for sprayers. To ensure it is a suitable replacement, be sure to compare the 1"3/8M through-shaft drive type, the foot-mounted design, and the flow rate and pressure required by your equipment.
Original replacement part numbers and brand names are provided for comparison purposes only. This does not imply that these are original parts.
Product's features
Product's features| Brand | COMET |
| Sub-family | Pompe pour pulvérisateur agricole, Pulvérisateur |
| Pressure | 20 Bars |
| Net Weight (kg) | 0 |
| Customs Code | 84135080 |
Oops, no compatibility information available for your equipment
Please contact our customer support to check the compatibility of this product with your model. Contact us