To see compatible parts Add my equipment

COMET BP60K LOW-PRESSURE DIAPHRAGM PUMP, 58 L/MIN

Ref.: CPCR14413

€375.00Tax excl.€450.00 Tax incl.

In stock from supplier, Ships within 4 to 7 days


BP60K low-pressure diaphragm pump with 2 diaphragms, a 1 3/8" M non-through shaft, and mounting feet. Its flow rate of 58 l/min at 540 rpm and its pressure of 20 bar are the key specifications for selecting the correct model.


This product is compatible? Check compatibility

Product's description

The BP60K low-pressure diaphragm pump is a dual-diaphragm model designed for applications requiring a steady flow rate at low pressure. This model features a flow rate of 58 l/min at 540 rpm, a pressure rating of 20 bar, a 1 3/8" M non-through shaft, and a foot-mounted configuration, shown without a PDF guard.

A low-pressure pump designed for precise installation

Within this product family, the diaphragm pump ensures the circulation of fluid within the system. For this BP60K model, the primary benefit is finding a configuration that is compatible with your existing equipment, without being limited solely by the commercial designation.

The presence of two diaphragms is one of the key identifying features to note, along with the shaft type and operating parameters. If you’re replacing a worn-out pump, this information allows you to more easily compare the model currently installed on your machine or system.

Key specifications for identifying the BP60K

  • Type: low-pressure diaphragm pump
  • Model: BP60K
  • Design: 2 diaphragms
  • Flow rate at 540 rpm: 58 l/min
  • Pressure: 20 bar
  • Shaft: 1 3/8" M, non-through
  • Mounting: with feet
  • Configuration: without PDF guard

These specifications are particularly useful when there are several similar pumps with different mounting configurations. The flow rate and pressure help determine the pump’s service level, while the shaft and feet determine mechanical compatibility.

What the non-through 1"3/8M shaft with feet changes

The specification “1"3/8M non-through shaft” is a key mechanical identifier. It directs the search toward a very specific drive configuration, which should not be confused with a different shaft variant. The mounting with feet is also a key factor in replacement, as it determines how the pump is installed on its base.

The notation “without PDF protection” also indicates a configuration that must be verified before ordering. It does not describe a universal optional accessory, but rather the condition of the pump as specified for this part number.

Useful Information Before Ordering

To select this low-pressure pump, start by noting the part number of your current pump and then compare the following specifications: BP60K, 2 diaphragms, 58 l/min at 540 rpm, 20 bar, 1"3/8M non-through shaft, and feet. Even a single difference in shaft type or mounting method may be enough to indicate that a different version is needed.

If your setup matches these specifications, you have the most useful information to confirm the correct pump before replacement.

Dimensions and Technical Specifications

  • 3/8M

FAQ — Frequently Asked Questions

What is a BP60K low-pressure diaphragm pump used for?

This pump is used to circulate a liquid in a low-pressure system. The BP60K is rated for a flow rate of 58 l/min at 540 rpm and a pressure of 20 bar, with a dual-diaphragm design that helps you precisely identify the correct part number.

How can you identify this version with a 1"3/8M non-through shaft?

You can identify it by its 1"3/8M non-through shaft, which is paired with mounting feet. This is important if you’re replacing an existing pump, as the shaft type and mounting method determine whether it will fit mechanically into your machine or system.

What does the “without PTO guard” designation on this pump mean?

This means that the pump is described without a power take-off guard in this configuration. When replacing the pump, you must therefore compare the complete configuration of your current setup—including the drive, mounting hardware, and the pump’s environment—to avoid any discrepancies in equipment.

What are the most helpful criteria for selecting this BP60K pump?

The most useful criteria are the model number BP60K, the dual-diaphragm configuration, the flow rate of 58 l/min at 540 rpm, the pressure of 20 bar, the 1"3/8M non-through shaft, and the presence of feet. These are the most critical factors for comparing it with your existing pump.

The original replacement part numbers and brand names are provided solely for comparison purposes. This does not imply that these are original parts.

For more information, see data sheet in "product feature" section.

Product's features

FR
Brand COMET
Sub-family Pompe pour pulvérisateur agricole, Pulvérisateur
Pressure 20 Bars
Net Weight (kg) 0
Customs Code 87089997

Oops, no compatibility information available for your equipment

Please contact our customer support to check the compatibility of this product with your model. Contact us

Can't find your part? Contact us!

© 2026 Camagris SARL