LOWER WATER PUMP HOSE FOR FENDT FARMER

The lower water pump hose is located at the bottom of the cooling system. This part number is intended for Fendt Farmer applications, with listed compatibility for the Farmer 310, Farmer 311, and Farmer 312. To select the correct part, cross-reference the machine model, part number 198201050030, and the dimensions listed on the hose to be replaced.

A hose located at the bottom of the cooling system

On a tractor, the lower hose connects the water pump to the lower part of the cooling system and helps circulate the coolant. Its location exposes it to temperature fluctuations, splashes, and rubber aging over time.

When this part wears out, signs often include hardening, cracking, localized swelling, or signs of leakage. Replacing a worn hose ensures the system is properly assembled again, rather than waiting for a more severe failure to occur during field work or transport.

Fendt Applications and Comparison Reference

This hose is designed for use on aFendt Farmer. A detailed list of compatible models is provided following the description. Part number 198201050030 serves as a useful reference for matching the part you are looking for to the one already installed on the machine.

With this family of hoses, visual similarity is not always sufficient. A single mounting location may accommodate multiple part numbers depending on the tractor’s configuration, year, or changes to the system. Verifying the part number and dimensions therefore remains the surest way to avoid mixing up this hose with a neighboring one.

Dimensions to Check for Proper Part Selection

The product sheet lists an inner diameter of 12/35 and an additional dimension of 45 mm. These dimensions are crucial for sorting through similar part numbers and confirming that the hose is indeed compatible with your setup.

Before ordering, compare the dimensions measured on the removed part, as well as its overall shape, how it runs through the engine compartment, and the orientation of its ends. A coolant hose must follow the correct path to be installed without excessive strain or interference with nearby components.

Useful Tips Before Replacement

It is best to perform this work when the engine is cold, and follow the maintenance procedure specified for your tractor. When removing the hose, take the opportunity to check the condition of the clamps and the appearance of the mounting surface. A dirty or uneven mounting surface can compromise the seal, even with a new hose.

If you are looking for this part for a Farmer Fendt, use the comparison part number 198201050030, the listed models, and the dimensions of the removed hose to confidently confirm your selection.

Dimensions and Technical Specifications

• INNER DIAMETER = 12/35
• 45 mm

Compatibility by make and model

FENDT

• Farmer 310
• Farmer 311
• Farmer 312

FAQ — Frequently Asked Questions

What is the purpose of a lower water pump hose?

It connects the lower section of the cooling system and facilitates the flow of coolant between the relevant components. Because of its low position, this type of hose is exposed to aging, temperature fluctuations, and installation stresses, which is why it’s important to check its condition regularly.

Is this hose designed for the Farmer 310, Farmer 311, and Farmer 312 Fendt?

Yes, this part number is listed for the Farmer 310, Farmer 311, and Farmer 3 Fendt. To ensure you’re selecting the correct part, also compare part number 198201050030 with the measurements taken from your old hose, as a part that looks similar may differ in diameter or shape.

What measurements should you check before ordering this hose?

The key measurements are the 12/35 inner diameter and an additional 45 mm dimension listed on the product sheet. Also check the hose’s overall shape and how it’s mounted in the lower part of the system, especially if the machine has undergone a previous repair or had a different installation.

What does the part number 198201050030 mean for this part?

Part number 198201050030 serves as a reference for identifying the correct hose. If this number matches your old part or your maintenance documentation, it provides an additional reference point in addition to the listed Fendt models and the dimensions shown on the product sheet.

Original replacement part numbers and brand names are provided for comparison purposes only. This does not imply that these are original parts.