T22198 SEAL RING FOR JOHN DEERE SERIES 10 THROUGH 50

The T22198 seal ring for John Deere is a replacement part designed for several tractors in the 10 through 50 series. It is intended for older models that are still in service, with numerous market and model variations. To select the correct part number, you must verify both the part number T22198 and the exact model designation of the tractor in question.

Role of a Sealing Ring in a Mechanical Assembly

The general function of a sealing ring is to ensure a seal between two connected components, often around a shaft or within a mechanical housing. On a tractor, this type of part helps keep lubricant within the assembly and helps limit the entry of contaminants during operation.

It is often replaced during a overhaul, a repair, or when the old seal shows signs of wear, hardening, or a loss of effectiveness. With this type of part, a misidentification can be enough to prevent the mechanical assembly from being reassembled correctly.

An application covering several John Deere series

Part number T22198 is associated with John Deere tractors spanning several generations, from the 10 Series to the 50 Series. It applies to both standard model designations and highly specific variants depending on the country or the tractor’s configuration.

For example, this includes models such as the 920, 1120, 1130, 1350, and 1550, as well as versions distinguished by their full model names, such as the 2020 (Europe), 2020 (USA), 1030 (Germany), 1040V, or 1850N. This level of precision is essential when selecting a part, as the same model number may correspond to different variants.

Points to check before selecting part number T22198

Before confirming your selection, it’s helpful to verify a few simple points:

• the part number T22198 found on the removed part or in your parts list;
• the complete tractor model designation, including its exact variant;
• the context of the replacement, particularly if the component has already been removed for maintenance or repair.

For tractor families such as the 2020, 2030, 1040, or 1850, the variant is critical. Designations such as “Europe,” “USA,” “Deutschland,” “Espana,” “V,” “F,” “N,” “OU,” or “VU” must not be simplified. They are part of the identification needed to find the correct matching ring.

A small part that must be identified precisely

When servicing John Deere tractors still in the shop or on the farm, the seal ring is one of the small but important components to consider during reassembly. This part number is suitable for a targeted replacement on models explicitly associated with T22198.

If you have any doubts, refer to the part number and the full model designation of your tractor before selecting this sealing ring.

Compatibility by Brand and Series

John Deere · 10 Series

• 920

John Deere · 20 Series

• 1120
• 2020 (Europe)
• 2020 (USA)
• 2120 (Europe)
• 2120 (USA)
• 820 (Europe)
• 820 (U.S.)

John Deere · 30 Series

• 1030 (Germany)
• 1030 (Spain)
• 1030OU
• 1030VU
• 1130
• 1630 (Germany)
• 1630 (Spain)
• 1630OU
• 1630VU
• 6:30 PM
• 2030 (Germany)
• 2030 (Spain)
• 2030 (USA)
• 2030OU
• 830 (Europe)
• 830 (USA)
• 930
• 930VU

John Deere · 40 Series

• 1040 (Germany)
• 1040 (Spain)
• 1040V
• 1140 (Germany)
• 1140 (Spain)
• 1140F
• 1140V
• 840
• 940 (Germany)
• 940 (Spain)
• 940V

John Deere · 50 Series

• 1,350
• 1550
• 1750
• 1750V
• 1850 (Germany)
• 1850 (Spain)
• 1850F
• 1850N
• 1850V

FAQ — Frequently Asked Questions

What is the purpose of a seal ring on a John Deere tractor?

A seal is used to maintain the seal of a mechanical assembly, often around a shaft or in a housing. When it is worn, hardened, or no longer effective, it can allow lubricant or contaminants to pass through, which is why it needs to be replaced during a repair.

Does part number T22198 correspond to variants such as 2020 (Europe), 2020 (USA), 2120 (Europe), and 2120 (USA)?

Yes, part number T22198 is suitable for these exact designations. You must include the full model designation, as the “Europe” or “USA” variant is part of the identification and helps avoid confusion with another similar application within the same tractor family.

Why is it necessary to distinguish between 1030 (Germany), 1030OU, and 1030VU?

They must be distinguished because these designations are listed separately for this part number. Even though the number 1030 is common to all, the country designation or suffix corresponds to a specific variant and must be reproduced exactly when selecting the sealing ring.

How can I confirm the correct part if I know the part number T22198 but not the exact location of the seal?

The safest approach is to start with the part number T22198 found on the removed part or in your parts list, then verify the tractor’s full model designation. If your machine has a variant such as V, F, N, OU, VU, Europe, USA, Deutschland, or Espana, this information is critical.

Original spare part numbers and brands are provided solely for comparison purposes. This does not imply that they are original parts.