To see compatible parts Add my equipment

EXHAUST ELBOW FOR DEUTZ DX AND DX6 04362996

Ref.: 04362996

€77.00Tax excl.€92.40 Tax incl.

In stock, Shipping within 24 hours


Adaptable exhaust elbow for Deutz tractors in the DX and DX6 series, comparable to part number 04362996. The dimensions 98.5 mm, 240 mm, 64 mm, and 72 mm help verify proper fit before replacement.


This product is compatible? Check compatibility

Product's description

The Deutz tractor exhaust elbow replaces a component in the exhaust system on several models in the DX and DX6 series. This replacement part is equivalent to part number 04362996 and can also be identified by its dimensions: 98.5 mm, 240 mm, 64 mm, and 72 mm. Be sure to verify these measurements before installing it on your machine.

The Role of the Elbow in the Exhaust System

An exhaust elbow is used to change the direction of the exhaust gas flow within the exhaust system. Its shape must match the intended installation on the tractor to allow for proper assembly with the other components already in place. When an elbow is worn, punctured, or deformed, replacement requires a part with equivalent geometry—not just a similar part number.

For this type of part, the selection is therefore based primarily on the comparison part number and the dimensions measured from the old assembly. This ensures there are no differences in overall dimensions or orientation when reinstalling the part.

Dimensions needed to identify this part number

For this version, the available dimensions are 98.5 mm, 240 mm, 64 mm, and 72 mm. Even when the tractor is clearly identified, these measurements remain useful for comparing the removed part with the new one, especially if your machine has undergone a previous modification to the exhaust system.

The 240 MM dimension serves as a length reference, while the other measurements help confirm the elbow’s overall dimensions. If you’re working in a workshop, take the time to compare these values with the removed part and visually verify the general orientation before placing an order.

Deutz Application and Part Number 04362996

This exhaust elbow is used on Deutz tractors in the DX and DX6 series. It corresponds to reference number 04362996, which is useful for finding the correct replacement part. This part is intended for agricultural models in the DX series, as well as DX6 variants such as the DX6.10 and DX6.30.

If your tractor belongs to one of these series, comparing the part number and dimensions remains the surest way to confirm the correct choice, especially when several similar configurations exist within the same family of machines.

Points to check before confirming the part

Before replacing your exhaust elbow, first check the part number marked on your old part or listed in your technical documentation. Next, check the dimensions 98.5 mm, 240 mm, 64 mm, and 72 mm, as well as the general shape of the pipe and its orientation on the tractor.

One caveat: simply belonging to a Deutz series does not guarantee a proper fit if the machine has undergone a different modification during its service life. For a more reliable purchase, always compare the part currently installed with this part number (04362996) and its dimensions before confirming the replacement.

If you are replacing an elbow on a Deutz DX or DX6, checking both the part number and the four relevant dimensions will help you select the part that fits your setup.

Dimensions and Technical Specifications

  • 98.5 MM
  • 240 MM
  • 64 mm
  • 72 MM

Compatibility by brand and series

DEUTZ · DX Series

  • DX110
  • DX110A
  • DX120
  • DX120A
  • DX85
  • DX85A
  • DX90
  • DX90A

DEUTZ · DX6 Series

  • DX6.10
  • DX6.30
  • B (mm)
  • D (mm)

FAQ — Frequently Asked Questions

What is the purpose of this exhaust elbow on a Deutz tractor?

This exhaust elbow is used to direct the flow of exhaust gases through the exhaust system. On a tractor, its shape is just as important as its part number, because a difference in dimensions or orientation can prevent proper installation with the components already in place.

How can I verify part number 04362996 before ordering?

The surest way is to compare part number 04362996 with the part you’re replacing and check the relevant dimensions listed: 98.5 mm, 240 mm, 64 mm, and 72 mm. These measurements help verify the overall dimensions of the elbow and ensure it fits your setup.

Is this elbow compatible with the Deutz DX110, DX120A, DX6.10, and DX6.30?

Yes, this part number is designed for Deutz tractors in the DX and DX6 series, including the DX110, DX110A, DX120, DX120A, DX85, DX85A, DX90, DX90A, DX6.10, and DX6.30. The final verification is done using the part number and dimensions of your old part.

When should an exhaust elbow be replaced?

Replacement is necessary when the elbow is punctured, severely corroded, cracked, or deformed. A leak at this point can complicate the installation of the exhaust system and interfere with the assembly of adjacent parts. A visual inspection of the shape and seating surfaces remains essential.

Original replacement part numbers and brand names are provided for comparison purposes only. This does not imply that these are original parts.

For more information, see data sheet in "product feature" section.

Product's features

FR
Brand DEUTZ, DEUTZ-FAHR
Family Spare parts for tractors
Origin Adaptable part - Non Authentic
Net Weight (kg) 5.245
Customs Code 87089997
Tractor Deutz
Model
DX110
Model
DX110A
Model
DX120
Model
DX120A
Model
DX6.10
Model
DX6.30
Model
DX85
Model
DX85A
Model
DX90
Model
DX90A

Can't find your part? Contact us!

© 2026 Camagris SARL