CAB SHOCK ABSORBER FOR VALTRA, PART NO. V33139100

The Valtra cab shock absorber, part number V33139100, is designed for tractors in the 6000, Hitech, M, Mega, Mezzo, T, T1, T2, and T3 series. This part is part of the cab suspension system and affects the cab’s performance during operation. To select the correct version, checking the part number and the exact tractor model is the first step.

Role of the Cab Shock Absorber on the Tractor

The cab shock absorber is part of the suspension system that accommodates the cab’s movements relative to the chassis. On an agricultural tractor, this type of component helps control the cab’s movement while working in the field, traveling on roads, and navigating uneven terrain.

Its general role is to help control the cab’s movements in conjunction with the other components of the suspension system. When a cab shock absorber is worn out, the driver may notice a less stable cab, more pronounced movements, or less consistent behavior between the suspension points.

Valtra Application and Part Number Identification

This version corresponds to part number V33139100 for Valtra tractors. It is compatible with several of the brand’s model families; a complete list of compatible models is provided immediately following this description for the 6000, Hitech, M, Mega, Mezzo, T, T1, T2, and T3 series.

This broad range of applications requires careful verification. At Valtra, similar model designations may exist across different series; therefore, it is important to use the tractor’s full model designation —not just the series letter—when selecting the part.

How to Choose the Right Cab Shock Absorber

The first step is to compare the part number you’re looking for with V33139100. Next, you need to match this part number to the exact tractor model. This is particularly useful for the M and T families, where numerically similar variants may correspond to different applications.

• Note the part number on the removed part if it is still legible;
• check the exact tractor designation in the model list;
• Do not automatically assume that an entire model series corresponds to a single part number;
• inspect the existing assembly if the cab has been repaired previously.

This simple method prevents confusion between similar models and makes it easier to identify the correct replacement part.

Points to Consider When Replacing

Replacing a cab shock absorber is often necessary after the appearance of unusual movements, a feeling of less consistent support, or cab behavior that changes depending on the load and ground conditions. For this type of part, a visual inspection of the entire assembly is a good starting point before complete disassembly.

If you are looking for this shock absorber for a Valtra tractor from the relevant series, use part number V33139100 and the exact identification of your machine to confirm compatibility before ordering.

Dimensions and Technical Specifications

• 120 M
• 130 M

Compatibility by Brand and Series

Valtra · 6000 Series

• 6000

Valtra · Hitech Series

• 6250
• 6350
• 6550
• 6650
• 6750
• 6,850
• 8,350
• 8950

Valtra · M Series

• M 120
• M 130
• M 150

Valtra · Mega Series

• 8050
• 8150
• 8450
• 8550
• 8750

Valtra · Mezzo Series

• 6100
• 6200
• 6300
• 6400
• 6600
• 6800

Valtra · T Series

• T 120
• T 130
• T 140
• T 150
• T 160
• T 170
• T 180
• T 190

Valtra · T1 Series

• T 121
• T 131
• T 151
• T 161
• T 171
• T191LS

Valtra · T2 Series

• T 152
• T 162
• T 172
• T 182
• T 202

Valtra · T3 Series

• T 133
• T 153
• T 163
• T 173
• T 183
• T 193
• T 203
• T 213

FAQ — Frequently Asked Questions

What does part number V33139100 refer to?

Part number V33139100 identifies this cab shock absorber for the Valtra applications specified on the product sheet. To confirm your selection, compare this part number with that of the part currently installed and verify the exact tractor model, as similar part numbers may exist across different series.

Is this cab shock absorber compatible with a Valtra T 170 or a Valtra T 203?

Yes, the Valtra T 170 and T 203 models are indeed listed among the specified applications, in the T and T3 series, respectively. It is still advisable to verify the machine’s full model designation and the part number on the removed part before finalizing the replacement.

When should a cab shock absorber be replaced?

Replacement is generally necessary when the cab exhibits more pronounced movement, less smooth handling, or a feeling of reduced support. With this type of part, the best practice is to inspect the condition of the entire assembly and confirm the part number before placing an order.

Why is it important to distinguish between the T, T1, T2, and T3 series at Valtra?

It’s important to distinguish between them because very similar names do not necessarily correspond to the same application. For example, the T 150, T 151, T 152, and T 153 belong to different series; therefore, the shock absorber must be selected based on the exact model, not just the T series.

Original spare part numbers and brand names are provided for comparison purposes only. This does not imply that they are original parts.