COMPLETE 310 MM CLUTCH KIT FOR RENAULT

This complete clutch kit is designed for Renault tractors in the Celtis, Ceres, Cergos, and Ergos series, as listed in the application guide. It includes the components typically replaced during a clutch overhaul: the clutch mechanism, a 310 mm clutch disc, and the clutch release bearing. The disc is identified by the part number 13Z 21.7x25, which helps ensure compatibility with your existing assembly.

A complete set for replacing the main clutch components

Instead of replacing a single part, this kit includes the major components involved in engaging and disengaging the power transmission between the engine and the transmission. This is a preferred solution when a clutch shows signs of wear and you want to start with a complete, coordinated assembly.

• mechanism
• 310 mm drive plate
• thrust plate

This configuration helps you quickly identify the part number if you’re looking for a complete assembly rather than just a disc or pressure plate on its own.

Selection criteria to check on your tractor

The first thing to check is the diameter of the feed disc: 310 mm. This measurement is one of the key criteria for avoiding confusion among the various possible configurations on a single tractor family.

The second reference is the disc identification: 13Z 21.7x25. This information is used to compare the disc installed on your machine with the part number you’re looking for. If you remove the old clutch, note these markings and dimensions before placing your order.

If your tractor has undergone a configuration change during its service life, there’s just one precaution to take: always compare the dimensions and part number of the clutch disc with the part you’ve removed.

Applicable Renault Models

This part number applies to Renault tractors in the Celtis, Ceres, Cergos, and Ergos model lines. It therefore addresses a common search for parts on machines in these families when the drive clutch needs to be repaired.

For the buyer, the benefit is having a kit identified both by its components and by its 310 mm disc. This simplifies selection when multiple clutch versions coexist depending on the model, year, or current assembly on the tractor.

When to Choose a Complete Kit Instead of a Single Part

A complete kit is generally chosen when wear affects not only the disc but the entire clutch assembly. A worn-out thrust bearing, a worn-out mechanism, or a disc at the end of its service life often necessitates replacing the main components together to avoid having to disassemble the system again later for another related part.

Before finalizing your choice, verify the exact model of your Renault tractor as well as the part numbers on the drive disc. This is the surest way to confirm the correct part number.

Dimensions and Technical Specifications

• 310 MM

Compatibility by Make and Series

Renault · Celtis Series

• Celtis 426
• Celtis 436
• Celtis 446
• Celtis 456

Renault · Ceres Series

• Ceres 310
• Ceres 320
• Ceres 320X
• Ceres 325
• Ceres 325X
• Ceres 330
• Ceres 330X
• Ceres 340
• Ceres 340X
• Ceres 345
• Ceres 345X

Renault · Cergos Series

• Cergos 335
• Cergos 340
• Cergos 345
• Cergos 350
• Cergos 355

Renault · Ergos Series

• Ergos 100
• Ergos 105
• Ergos 110
• Ergos 85
• Ergos 90
• Ergos 95
• CONTAINS

FAQ — Frequently Asked Questions

What does this complete clutch kit contain?

This kit includes three components: the clutch mechanism, the 310 mm clutch disc, and the pressure plate. This set replaces the main wear parts of the clutch and includes a useful identification mark on the clutch disc: 13Z 21.7x25.

Which Renault tractors is this clutch kit compatible with?

This kit is designed for Renault tractors in the Celtis, Ceres, Cergos, and Ergos series. Examples of explicitly compatible models include the Celtis 426, Ceres 320X, Cergos 350, and Ergos 105. Be sure to verify the exact model before ordering.

How can I verify that the disc is compatible with my setup?

The most useful way to verify this is to compare the diameter of the drive plate (310 mm) and its part number 13Z 21.7x25.. These specifications allow you to match the part to your existing setup and avoid confusion between different clutch versions.

When should this type of clutch kit be replaced?

A clutch kit is generally replaced when the assembly shows disc wear, mechanical fatigue, or a noisy thrust bearing. Replacing the main components at the same time helps ensure a consistent setup, provided you confirm the correct part number.

Original replacement part numbers and brand names are provided for comparison purposes only. This does not imply that these are original parts.