To see compatible parts Add my equipment

PEINTURE ROUGE CASE IH A PARTIR DE 1986 POT DE 750 ML

Ref.: PE0443-300

€11.59Tax excl.€13.91 Tax incl.

Consult us for the deadline

This product is no longer in stock.

We will send you an email once the product becomes available. Your email address will not be shared with anyone else.


Case ih red paint from 1986 300 ml aerosol gloss paint for suitably primed steel and galvanized steel substrates.
for high-quality painting of tractors and other agricultural machinery and equipment.

properties :
solvent-based,
shock and impact resistant,
excellent flow,
good covering power,
stable shine,
high color stability,
gasoline and diesel resistant,
temperature resistance: permanent load: about 120 ° C; short-term exposure: around 150 ° c

yield 0.90 ml / m2 or approximately 8 m2 per 750 ml pot The numbers of original spare parts and brands are provided exclusively for comparison purposes. This does not imply that they are original parts.

This product is compatible? Check compatibility

Product's description

Spray:

Push the spray head all the way. Spray from a distance of at least 25 cm. Never spray the object directly. Apply in a cross motion. Always keep the spray jet moving, do not spray in one spot for longer. After spraying, turn the can upside down and spray until no more paint comes out. Remove the spray head, clean it with solvent and store it under the protective cap.

Prepare the funds according to the rules of the art. To obtain sufficient protection, apply at least 2 coats.

The ambient temperature and that of the object must be at least + 5 ° C during processing and drying.

Too thick a coat and too short drying times between coats can lead to wrinkles in the coating surface and prolonged drying times.

  • Ensure adequate ventilation during processing and drying indoors.

  • Observe sufficient drying time between coats.

  • The environment of the surfaces to be coated must be covered and protected from

    splashing material.

  • On continuous surfaces,

    Shake for 3 minutes before use, the sound of the ball should be clearly audible.

  • Approx. 90 ml / m2 per coat. Consumption may vary depending on the nature and structure of the substrate and the application process. Determine the exact consumption values by carrying out a test on the support.

    At + 20 ° C and 65% relative humidity:
    Surface dry after approx. 2 hours
    Recoatable after approx. 12 hours
    Drying time is increased at low temperature and / or higher air humidity.

For more information, see data sheet in "product feature" section.

Product's features

Family Spare parts for tractors
Origin Adaptable part - Non Authentic

Oops, no compatibility information available for your equipment

Please contact our customer support to check the compatibility of this product with your model. Contact us

Can't find your part? Contact us!

© 2026 Camagris SARL