BRAKE PADS FOR DAVID BROWN K262704

These K262704 brake linings are designed for several David Brown tractors in the 800, 900, 90, 94, and 1200 series. This set has listed dimensions of 205 x 63.5 mm and includes the rivets needed for installation. To ensure a proper replacement, the first step is to verify compatibility by checking the dimensions and cross-reference numbers.

A Wear Part at the Heart of the Braking System

The brake lining is the component that comes into contact with the braking mechanism to create the friction necessary for deceleration. On a tractor, its condition directly affects the consistency of the braking response. When the surface is worn, marked, or damaged, replacing the pads restores the system to proper working order.

This part number corresponds to a set of brake pads. It is suitable when you are looking for a replacement part that meets the specified dimensions for the intended David Brown models.

Dimensions and Kit Contents

The highlighted dimensions are 205 x 63.5 mm. The detailed dimensions provided are 205 x 63 x 4.5 mm. The length is also given as 8 1/2 inches, or 216 mm, and the width as 2 1/2 inches. These measurements are important if you are comparing them to a removed gasket or to a measurement taken in your workshop.

The set comes with 48 J10 rivets, each 15 mm long. This information is important when preparing for the replacement, as it allows you to achieve an assembly that matches the part you’re looking for, without having to separately source a different type of rivet.

The associated comparison part numbers are K262704, K962168, and K962266. If one of these part numbers appears on your old part or in your measurement notes, you have a useful reference to confirm you’ve made the right choice.

David Brown Applications Covered

This kit is designed for several generations of David Brown tractors, including models in the 800, 900, 90, 94, and 1200 series. This notably includes Selectamatic models as well as numbered versions within the same family. A detailed list of compatible models is included with the product sheet to ensure each designation is accurate.

If you are working on an 885 Selectamatic, a 990 Selectamatic, a 995, a 996, an 1190, a 1290, a 1390, an 1194, a 1294, a 1200, a 1210, or a 1212, checking the part numbers and dimensions will help you quickly verify compatibility.

Choose Wisely Before Replacement

To select this part number, first check four key points: the part number you noted, the lining dimensions, the specified thickness, and the type of rivet mounting. On older tractors or those that have already been repaired, this check prevents discrepancies between the removed part and the expected replacement.

If your old assembly is dimensioned in inches, the inclusion of equivalents in millimeters also simplifies the verification process. Before confirming your choice, compare the dimensions and part numbers of your brake system to ensure you’re getting the same brake lining.

Dimensions and Technical Specifications

• 205 X 63.5 MM
• Length: 8 1/2 inches
• 216 mm
• Width: 2 1/2 inches
• Length: 15 mm
• Dimensions: 205 x 63 x 4.5 mm

Compatibility by brand and series

800 Series

• 885 Selectamatic

900 Series

• 990 Selectamatic
• 995 Selectamatic
• 995
• 996 Selectamatic
• 996

90 Series

• 1190
• 1290
• 1390

94 Series

• 1194
• 1294

1200 Series

• 1200
• 1210
• 1212

FAQ — Frequently Asked Questions

What is the K262704 brake pad set used for?

This set is used to replace the brake friction surface on the applicable tractors. The brake pads help slow down and stop the machine; when they are worn, cracked, or excessively grooved, replacing them ensures the machine operates within the specified tolerances.

How can I identify this part number before ordering?

Identification is based first on the comparison part numbers K262704, K962168, and K962266, and then on the listed dimensions. Also check the gasket’s size, the specified thickness, and the presence of 48 J10 rivets, 15 mm long, if you are replacing the assembly with an identical one.

Are these liners compatible with the David Brown 885 Selectamatic and 990 Selectamatic?

Yes, these two models are among the applications listed for this part number. The set is also listed for other David Brown models in the 900, 90, 94, and 1200 series; however, we recommend confirming the part number and the dimensions measured on your old gaskets before installation.

Why are the dimensions listed as both 205 x 63.5 mm and 205 x 63 x 4.5 mm?

Both notations refer to the same type of gasket, with the dimensions presented differently. The 205 x 63.5 mm format lists the length and width, while 205 x 63 x 4.5 mm includes the thickness. Always compare these measurements with your removed part before ordering.

Original replacement part numbers and brand names are provided for comparison purposes only. This does not imply that these are original parts.