ASPFL BEARINGS WITH OVAL 2-HOLE SHEET METAL FLANGE – 200 Series

ASPFL Series 200 Bearings with 2-Hole Oval Flange Made of Stamped Steel

TheASPFL Series 200 Bearings are complete assemblies combining a self-aligning insert bearing and an oval flanged housing made of deep-drawn sheet steel.

This design results in a compact, lightweight bearing that is easy to install when space around the shaft is limited.

Camagris currently offers the following productsASPFL204, ASPFL205, ASPFL206, ASPFL207, and ASPFL208, corresponding to trees ranging from 20 to 40 mm.

The products offered in this category are sold under the brand nameCredits.

What is an ASPFL bearing ?

An ASPFL bearing consists of aPFL housing made of stamped steel sheet and aAS Series Insert Bearing.

The flange has two mounting holes positioned on either side of the bearing. Its oval shape allows for compact mounting on a wall, sheet metal, a frame, or any other support through which the shaft passes.

The bearing has an outer surface designed to fit the housing and can compensate for slight static misalignment. It is secured directly to the shaft using locking screws.

The manufacturer's bill of materials confirms, for example:

ASPFL204 = AS204 bearing + PFL204 housing

ASPFL205 = AS205 bearing + PFL205 housing

ASPFL206 = AS206 bearing + PFL206 housing

ASPFL207 = AS207 bearing + PFL207 housing

ASPFL208 = AS208 bearing + PFL208 housing.

Why choose a deep-drawn sheet metal bearing ?

The main advantage of the ASPFL bearing lies in itscompact design.

Unlike a solid cast-iron housing, the ASPFL housing is made of steel sheets formed around the bearing. This design reduces the weight and thickness of the housing.

The ASPFL bearing is particularly well-suited for applications in which the load is compatible with this type of housing and where compactness is a priority.

It is particularly useful when the machine has a thin wall, a sheet metal panel, or a support on which a cast-iron bearing would be unnecessarily bulky.

Dimensions of the ASPFL204 through ASPFL208

The standard main dimensions for the series are as follows:

Dimensions may vary slightly depending on the manufacturer and the specific model. Before replacing an existing bearing, always check the shaft diameter, center-to-center distance, overall length, and the dimensions of the mounting holes.

How to Choose the Right ASPFL Bearing ?

Check the shaft diameter

The first criterion is the bearing bore.

ASPFL204 corresponds to a shaft20 mm.

ASPFL205 corresponds to a shaft25 mm.

ASPFL206 corresponds to a shaft30 mm.

ASPFL207 corresponds to a tree of35 mm.

ASPFL208 corresponds to a shaft of40 mm.

Measure the distance between the two holes

The shaft diameter alone is not sufficient to identify a complete bearing assembly.

Also measure the distance between the centers of the two mounting holes. For an ASPFL205, for example, the standard center-to-center distance is76 mm, whereas an ASPFL207 has a center-to-center distance of approximately100 mm. 

Manage Clutter in Your Home

Compare the total length, body width, sheet metal thickness, and hole diameter.

These checks help ensure, in particular, that an ASPFL is not mistaken for an ASFW or an UCFL.

What is the difference between ASPFL and ASFW ?

This is an important distinction, since Camagris markets both product lines.

TheASPFL owns a home instamped steel sheet.

TheASFW has a rigid housing made ofcast iron.

Both series use a compact mounting design with a two-hole oval flange and are compatible with AS-series inserts, but their housings are very different.

The ASPFL is generally:

lighter ;

thinner ;

more compact ;

well-suited for supports made of sheet metal.

ASFW is generally:

more massive ;

more rigid ;

best suited when you're looking for a cast-iron fixture.

An ASPFL205 and an ASFW205 should therefore not be substituted for one another simply because they both have a 25-mm bore.

What is the difference between ASPFL and UCFL ?

TheUCFL is also an oval flange with two holes, but it typically uses a bearing insertUC with wide inner ring.

The ASPFL uses a standard insertAS and a stamped-sheet-metal housing.

Both the ASPFL205 and the UCFL205 are designed for a 25-mm shaft, but their dimensions, bearing width, and housing design differ.

Therefore, they are not interchangeable without a dimensional check.

What is the difference between ASPFL and UCF ?

The ASPFL has aoval clamp with two fasteners.

The UCF has asquare cast-iron housing with four mounting points.

The UCF is better suited for installations requiring a rigid four-point flange, while the ASPFL offers a significantly more compact solution.

The AS insert bearing used in an ASPFL

The AS series insert bearing is a self-aligning bearing specifically designed to operate in a compatible housing.

The AS series uses a shaft mounting vialocking screw.

The BBC-R cross-brand reference table links the AS family to the following major series:

SKFYAT

INA / SchaefflerGAY

SNRUS

TimkenGYAE

NSKAS. 

These specifications primarily apply to the insert-type bearing family. To replace a complete bearing, you must also inspect the housing and its dimensions.

Comparisons Between Major Brands

According to the manufacturer, the exact designation of the complete bearing assembly may vary.

The Bill of MaterialsASPFL It is used, in particular, by NTN and several manufacturers of generic bearings. NTN describes this family as a two-hole flanged assembly made of stamped steel with screw-mounted bearings.

Other manufacturers use similar designations, such asASPF for flanged assemblies made of stamped sheet metal.

However, you should not assume that two part numbers are strictly interchangeable based solely on their names. Always check the dimensions.

Agricultural and Industrial Applications

ASPFL bearings can be used, for example, in the following applications:

• conveyors and small conveyor belts ;
• transfer screws and augers ;
• fans and turbines ;
• Grain storage equipment ;
• intermediate shafts ;
• small transmissions ;
• livestock equipment ;
• material-handling equipment ;
• packaging machines ;
• Agricultural equipment and facilities built in the workshop.

In the agricultural sector, bearings and bearing housings can be exposed to dust, moisture, vibrations, and contaminants. Specialized manufacturers emphasize the importance of sealing and the choice of housing in these environments.

Advantages of the ASPFL Bearing

Lightweight Construction

A deep-drawn steel housing is much lighter than an equivalent cast iron bracket.

Compact design

The flange's thin profile makes it easy to install in compact machines.

Two mounting points

The oval shape allows the bearing to be secured with just two bolts.

Quick Assembly

The bearing and housing are supplied as a ready-to-install assembly.

Auto-alignment

The bearing can compensate for minor misalignments between the shaft and the mounting.

Replaceable insert

If the housing is still in good condition, it is possible to replace only the insert bearing, provided that you select exactly the right series.

How do you install an ASPFL bearing ?

Before installation, clean the shaft and check that it has no burrs, significant corrosion, or deformation.

Place the bearing on the shaft, then position the two mounting bolts without tightening them completely.

If multiple bearings support the same shaft, align the entire assembly before tightening it permanently.

Next, check to make sure the shaft turns freely.

Tighten the housing bolts and then the bearing set screws gradually.

Avoid striking the bearing seals or rings directly.

Maintenance of an ASPFL Bearing

The service life of a bearing depends, in particular, on the load, speed, alignment, condition of the shaft, and the environment.

Regularly check for bearing play, unusual noises, temperature, the condition of the seals, and the tightness of the fasteners.

For agricultural applications that are highly exposed to dust, dirt, or moisture, sealing becomes a critical factor. Agricultural solutions with reinforced seals are specifically designed to limit the entry of contaminants into the bearing.

Frequently Asked Questions About ASPFL Bearings

What does ASPFL205 mean ?

ASPFL refers to a deep-drawn steel oval-flange bearing housing equipped with an AS-series insert bearing. The code 205 corresponds to a 25-mm shaft.

Which ASPFL should I choose for a 20-mm shaft ?

The corresponding reference isASPFL204.

Which ASPFL should I choose for a 25 mm shaft ?

The reference isASPFL205, with a standard mounting center-to-center distance of 76 mm.

Which ASPFL should I choose for a 30 mm shaft ?

Choose aASPFL206, designed for a 30-mm shaft and a center-to-center distance of approximately 90.5 mm.

Which ASPFL should I choose for a 35-mm shaft ?

The corresponding reference isASPFL207.

Which ASPFL should I choose for a 40 mm shaft ?

The reference isASPFL208.

What is the difference between ASPFL205 and ASFW205 ?

Both are designed for a 25-mm shaft, but the ASPFL has a stamped steel housing, while the ASFW uses a cast iron housing.

What is the difference between ASPFL205 and UCFL205 ?

The ASPFL205 uses an AS205 insert and a PFL205 stamped steel housing. The UCFL205 uses a UC205 insert bearing with a wide inner ring and a different type of housing.

Is shipping included ?

Yes. A complete ASPFL bearing assembly is supplied with its housing and insert bearing.

Can you replace just the bearing ?

Yes, if both parts of the sheet-metal housing are still in good condition and if the replacement insert has exactly the required dimensions and geometry.

Order your ASPFL bearings from Camagris

Camagris currently offers theASPFL204, ASPFL205, ASPFL206, ASPFL207, and ASPFL208, for shafts between 20 and 40 mm.

To select the correct part number, first note the shaft diameter, the center-to-center distance between the two mounting holes, the total length of the housing, and the available width around the mounting area.

If you are unsure whether a part is an ASPFL, an ASFW, or a UCFL, compare the full dimensions rather than just the serial number.